Can anyone give me the size and rigging specifications for the boom on a CD Typhoon Weekender? The yard that stored my boat seems to have "lost" the boom, and I'm hoping to replace it quickly. Had to launch and sail the boat today with only the jib. Thanks.
cgulliver@attbi.com
CD Typhoon Weekender Boom Specifications
Moderator: Jim Walsh
-
D. Stump, Hanalei
Re: Spartan Spars....
Cate,
Click on "where to look" above and take a look at the listing for Rig-Right/Spartan Spars. The stuff you need includes a CD-1 boom, measurements 2.75"x1.75"., 8'10" long. You will also need a CD-1 gooseneck assembly SP-031FS. Outhaul casting, cleats etc. you will need to talk to Rig-Right. There telephone number is (401) 739-1140.
Oh, and if the yard lost it, I would think they should pay for all of it....good luck.....
D. Stump
Hanalei CD-30C
Click on "where to look" above and take a look at the listing for Rig-Right/Spartan Spars. The stuff you need includes a CD-1 boom, measurements 2.75"x1.75"., 8'10" long. You will also need a CD-1 gooseneck assembly SP-031FS. Outhaul casting, cleats etc. you will need to talk to Rig-Right. There telephone number is (401) 739-1140.
Oh, and if the yard lost it, I would think they should pay for all of it....good luck.....
D. Stump
Hanalei CD-30C
-
D. Stump, Hanalei
Re: Spartan Spars....
Cate,
Click on "where to look" above and take a look at the listing for Rig-Right/Spartan Spars. The stuff you need includes a CD-1 boom, measurements 2.75"x1.75"., 8'10" long. You will also need a CD-1 gooseneck assembly SP-031FS. Outhaul casting, cleats etc. you will need to talk to Rig-Right. There telephone number is (401) 739-1140.
Oh, and if the yard lost it, I would think they should pay for all of it....good luck.....
D. Stump
Hanalei CD-30C
Click on "where to look" above and take a look at the listing for Rig-Right/Spartan Spars. The stuff you need includes a CD-1 boom, measurements 2.75"x1.75"., 8'10" long. You will also need a CD-1 gooseneck assembly SP-031FS. Outhaul casting, cleats etc. you will need to talk to Rig-Right. There telephone number is (401) 739-1140.
Oh, and if the yard lost it, I would think they should pay for all of it....good luck.....
D. Stump
Hanalei CD-30C
-
D. Stump, Hanalei
Re: Outhaul assembly...
Cate,
I didn't look at all that I had printed from Spartan Boom data. The Outhaul assembly you probably want is "CD-1 Outhaul assembly with one Tang: SP-033-1". Includes single pivoting tang for mainsheet and outhaul/topping lift attachment points. Use this if you sheet at the end of the boom, which I think you probably do. You may also need and "Outhaul slide". Those are also listed.
D. Stump, Hanalei
I didn't look at all that I had printed from Spartan Boom data. The Outhaul assembly you probably want is "CD-1 Outhaul assembly with one Tang: SP-033-1". Includes single pivoting tang for mainsheet and outhaul/topping lift attachment points. Use this if you sheet at the end of the boom, which I think you probably do. You may also need and "Outhaul slide". Those are also listed.
D. Stump, Hanalei
-
Cate Gulliver
Re: Spartan Spars....
D. Stump: Thanks very much for your help!
cgulliver@attbi.com
D. Stump, Hanalei wrote: Cate,
Click on "where to look" above and take a look at the listing for Rig-Right/Spartan Spars. The stuff you need includes a CD-1 boom, measurements 2.75"x1.75"., 8'10" long. You will also need a CD-1 gooseneck assembly SP-031FS. Outhaul casting, cleats etc. you will need to talk to Rig-Right. There telephone number is (401) 739-1140.
Oh, and if the yard lost it, I would think they should pay for all of it....good luck.....
D. Stump
Hanalei CD-30C
cgulliver@attbi.com