I have a roller furling genoa for our 1976 CD25. I would like to pick up a used working jib for a spare. Does anyone have the dimensions out there? Thanks.
tomb5050@aol.com
Jib Measurements for CD25
Moderator: Jim Walsh
-
Jeff Funston
-
Don Carr
Re: Jib Measurements for CD25
Tom;
Here are the measurements from my rigger. Keep in mind I do not have roller furling but hanked on. FWIW.
From pin to pin the measurement is 28 feet 7.5 inches. In addition it
measures 11.5 inches from the bottom pin to the top of the stud on the
turnbuckle.
carrd48@netzero.net
Here are the measurements from my rigger. Keep in mind I do not have roller furling but hanked on. FWIW.
From pin to pin the measurement is 28 feet 7.5 inches. In addition it
measures 11.5 inches from the bottom pin to the top of the stud on the
turnbuckle.
carrd48@netzero.net