Good news for anyone who wants a NEW 25, 26 or 270

Catherine Monaghan · Post by **Catherine Monaghan** » Nov 20th, '01, 17:14

Triangle Marine Engineering, Ltd. of North Kingstown, RI is now in possession of the molds for the Cape Dory 25, 26 and 270. They cannot use the Cape Dory name so the new boats will be called the Hadley 25, 26 and 27 (named after beautiful Hadley Harbor, MA). If you'd like additional information, they can be contacted at:

Triangle Marine Engineering, Ltd.
87 Airport Street, Bldg. #20
Quonset Davisville Commerce Park
North Kingstown, RI 02852
Phone/Fax: 401-295-7773
E-mail: <a href="mailto:TRIMARENG@aol.com?Subject=Hadley 25, 26 and 27">TRIMARENG@aol.com</a>

catherine_monaghan@merck.com

Mike L. · Post by **Mike L.** » Nov 20th, '01, 17:41

I wonder what ever happened to the 25D molds? I read they were acquired by Octavia Marine but never heard of any being produce. Hopefully the molds haven't been destroyed or lie wasting away in some field.

mikit@pioneer-net.com

Catherine Monaghan · Post by **Catherine Monaghan** » Nov 20th, '01, 19:30

Mike,

If I read the communication from Triangle Marine Engineering correctly, they acquired the molds for the CD25, 26 and 270 from Octavia. I'm not sure if the mold from the 25 is for the 25D or not. I'll find out.

Cathy
catherine_monaghan@merck.com
CD32 Realization, #3
CCDOA Assistant Webmaster

Mike L. wrote: I wonder what ever happened to the 25D molds? I read they were acquired by Octavia Marine but never heard of any being produce. Hopefully the molds haven't been destroyed or lie wasting away in some field.

catherine_monaghan@merck.com

Steve Ingmire · Post by **Steve Ingmire** » Nov 21st, '01, 06:43

Catherine Monaghan wrote: Triangle Marine Engineering, Ltd. of North Kingstown, RI is now in possession of the molds for the Cape Dory 25, 26 and 270. They cannot use the Cape Dory name so the new boats will be called the Hadley 25, 26 and 27 (named after beautiful Hadley Harbor, MA). If you'd like additional information, they can be contacted at:

Triangle Marine Engineering, Ltd.
87 Airport Street, Bldg. #20
Quonset Davisville Commerce Park
North Kingstown, RI 02852
Phone/Fax: 401-295-7773
E-mail: <a href="mailto:TRIMARENG@aol.com?Subject=Hadley 25, 26 and 27">TRIMARENG@aol.com</a>

I noticed CD270,am I correct in assuming this does not include a standard CD27

chiping@tcol.net

Dave Perry · Post by **Dave Perry** » Nov 21st, '01, 12:19

Catherine, this is great news! I believe they must have the 25D, 26 and 270, (not the 25 or the 27 as we have the 25 and the 27Alberg was inadvertantly destroyed) I hope they are very successful. Should help re-sale values, too!

RMC@clinic.net

John R. · Post by **John R.** » Nov 21st, '01, 17:13

Who has the CD30 (traditional) mold?

Mike,

Catherine Monaghan wrote: If I read the communication from Triangle Marine Engineering correctly, they acquired the molds for the CD25, 26 and 270 from Octavia. I'm not sure if the mold from the 25 is for the 25D or not. I'll find out.

Cathy
catherine_monaghan@merck.com
CD32 Realization, #3
CCDOA Assistant Webmaster

Mike L. wrote: I wonder what ever happened to the 25D molds? I read they were acquired by Octavia Marine but never heard of any being produce. Hopefully the molds haven't been destroyed or lie wasting away in some field.

Will W. · Post by **Will W.** » Nov 21st, '01, 21:37

You said we have the mold for the CD25 Stadel designed hull. Who is we? Also what happened to the mold for the 27? Like I said, just curious.

Will Wheatley
Suzi Q
CD25

Dave Perry wrote: Catherine, this is great news! I believe they must have the 25D, 26 and 270, (not the 25 or the 27 as we have the 25 and the 27Alberg was inadvertantly destroyed) I hope they are very successful. Should help re-sale values, too!

willwheatley@starpower.net

Ken Coit · Post by **Ken Coit** » Nov 22nd, '01, 09:04

Dave Perry is with Robinhood Marine Center, purveyor of the Robinhood 36 and other boats of Cape Dory heritage.

Ken
CD/36 Parfait
Raleigh, NC

Will W. wrote: You said we have the mold for the CD25 Stadel designed hull. Who is we? Also what happened to the mold for the 27? Like I said, just curious.

Will Wheatley
Suzi Q
CD25

Dave Perry wrote: Catherine, this is great news! I believe they must have the 25D, 26 and 270, (not the 25 or the 27 as we have the 25 and the 27Alberg was inadvertantly destroyed) I hope they are very successful. Should help re-sale values, too!

parfait@nc.rr.com

Clay Stalker · Post by **Clay Stalker** » Nov 23rd, '01, 07:15

John R. wrote: Who has the CD30 (traditional) mold?

Mike,

Catherine Monaghan wrote: If I read the communication from Triangle Marine Engineering correctly, they acquired the molds for the CD25, 26 and 270 from Octavia. I'm not sure if the mold from the 25 is for the 25D or not. I'll find out.

Cathy
catherine_monaghan@merck.com
CD32 Realization, #3
CCDOA Assistant Webmaster

Mike L. wrote: I wonder what ever happened to the 25D molds? I read they were acquired by Octavia Marine but never heard of any being produce. Hopefully the molds haven't been destroyed or lie wasting away in some field.

I think Robinhood has that mold also....Dave Perry and I talked recently about the possibility of a new Robinhood 30...sounds attractive, as Robinhood does beautiful work...but unfortunately, big, big, bucks as might be expected....folks with nice CD30s...hang on to them and treat them nice....

Clay Stalker

cstalker@cheshire.net

Clay Stalker · Post by **Clay Stalker** » Nov 23rd, '01, 09:22

Dave Perry wrote: Catherine, this is great news! I believe they must have the 25D, 26 and 270, (not the 25 or the 27 as we have the 25 and the 27Alberg was inadvertantly destroyed) I hope they are very successful. Should help re-sale values, too!

Dave:

Sad to hear about the demise of the Alberg 27 mold...does that make the CD27 more or less valuable in your estimation?

clay

cstalker@cheshire.net

D. Stump, Hanalei · Post by **D. Stump, Hanalei** » Nov 23rd, '01, 12:30

Captain Stalker,

Just curious, what is RobinHood M. asking for a new 30 cutter? Hey, for next years contest at sea I'm already looking at a whole new suit of sails - why not a new vessel to hang 'em on! This IS going to drive the competition NUTS ! ! !

Dave Stump
Hanalei

Clay Stalker · Post by **Clay Stalker** » Nov 23rd, '01, 18:54

D. Stump, Hanalei wrote: Captain Stalker,

Just curious, what is RobinHood M. asking for a new 30 cutter? Hey, for next years contest at sea I'm already looking at a whole new suit of sails - why not a new vessel to hang 'em on! This IS going to drive the competition NUTS ! ! !

Dave Stump
Hanalei

Hi Dave:

It was around $150,000 I believe....I'm sure that doesn't include a lot of stuff like sails and electronics....This does not surprise me as a couple of years ago, while searching for a used Shannon 28, I called Walt Shultz at Shannon Yachts and asked if he could still build a Shannon 28. He said he could, but price would be around $175,000! Kinda scary, but he explained that most of the cost of building boats these days is labor, so the difference between a 28 and 38 (they still build these) is not as much as you might think. Tom Morris at Morris Yachts told me the same thing about his Linda 28...$165,000+. Sure makes a well cared for Cape Dory seem like a real bargain to me. I just gave up dreaming a bought a nice 1982 CD27 that has made a permanent CD (or Robinhood) convert of me! Thanks for being around the message board!

Clay Stalker
CD27 Salsa hull #247
Bristol Harbor, Rhode Island

cstalker@cheshire.net

Catherine Monaghan · Post by **Catherine Monaghan** » Nov 26th, '01, 09:42

Steve,

Triangle has the mold for the CD270 not the 27.

Cathy

Steve Ingmire wrote:
Catherine Monaghan wrote: Triangle Marine Engineering, Ltd. of North Kingstown, RI is now in possession of the molds for the Cape Dory 25, 26 and 270. They cannot use the Cape Dory name so the new boats will be called the Hadley 25, 26 and 27 (named after beautiful Hadley Harbor, MA). If you'd like additional information, they can be contacted at:

Triangle Marine Engineering, Ltd.
87 Airport Street, Bldg. #20
Quonset Davisville Commerce Park
North Kingstown, RI 02852
Phone/Fax: 401-295-7773
E-mail: <a href="mailto:TRIMARENG@aol.com?Subject=Hadley 25, 26 and 27">TRIMARENG@aol.com</a>

I noticed CD270,am I correct in assuming this does not include a standard CD27

catherine_monaghan@merck.com

Catherine Monaghan · Post by **Catherine Monaghan** » Nov 27th, '01, 11:05

Okay, it's been confirmed. Triangle Marine Engineering, Ltd. has the molds for the CD25D, CD26 and the Dieter Empacher designed CD270. The new boats will be built as the Hadley 25, 26 and 27.

Cathy
catherine_monaghan@merck.com
CD32 Realization, #3
CCDOA Assistant Webmaster

Catherine Monaghan wrote: Triangle Marine Engineering, Ltd. of North Kingstown, RI is now in possession of the molds for the Cape Dory 25, 26 and 270. They cannot use the Cape Dory name so the new boats will be called the Hadley 25, 26 and 27 (named after beautiful Hadley Harbor, MA). If you'd like additional information, they can be contacted at:

Triangle Marine Engineering, Ltd.
87 Airport Street, Bldg. #20
Quonset Davisville Commerce Park
North Kingstown, RI 02852
Phone/Fax: 401-295-7773
E-mail: <a href="mailto:TRIMARENG@aol.com?Subject=Hadley 25, 26 and 27">TRIMARENG@aol.com</a>

catherine_monaghan@merck.com

The Cape Dory Board

Good news for anyone who wants a NEW 25, 26 or 270

Good news for anyone who wants a NEW 25, 26 or 270

Re: Good news for anyone who wants a NEW 25, 26 or 270

Re: Good news for anyone who wants a NEW 25, 26 or 270

Re: Good news for anyone who wants a NEW 25, 26 or 270

Re: Good news for anyone who wants a NEW 25, 26 or 270

Re: Good news for anyone who wants a NEW 25, 26 or 270

Just Curious

Re: Just Curious

Re: Good news for anyone who wants a NEW 25, 26 or 270

Re: Good news for anyone who wants a NEW 25, 26 or 270

Re: NEW CD-30C ! ! ! Just curious ! ! !

Re: NEW CD-30C ! ! ! Just curious ! ! !

CD270 mold not CD27

Confirmed: CD25D, CD26 and CD270