How to Build a Reinforced Boom

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: Jim Walsh

Post Reply
John Stone
Posts: 3612
Joined: Oct 6th, '08, 07:30
Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com

How to Build a Reinforced Boom

Post by John Stone »

I built a new boom for the Far Reach. I documented it in a two part video series on YouTube. Part two is now uploaded.

The videos detail how to fabricate and install a reinforcing bar, fabricate hardware, install backing plates, and there is extensive info on applying primer as well as applying Awlgrip using the brush and tip method.

Part 1 https://youtu.be/Fizcf9UK_BQ?si=dx7YwT5ejRgzIRFt

Part 2 https://youtu.be/6F7J44iBjGk?si=Pqik-diVCvTFl0XF
Stampie
Posts: 1
Joined: Sep 28th, '24, 05:19

Re: How to Build a Reinforced Boom

Post by Stampie »

Great work on the boom build! The details in your videos, especially on the Awlgrip application and reinforcing bar, are super helpful. I recently tackled a similar project and ran into some tricky parts with the hardware installation, especially getting everything aligned just right. Your tips on using the right tools really helped me out. I also found it helpful to browse for some deals online when gathering supplies. I came across Deals here (https://www.dealsandstealstoday.com/view-your-deal/ and picked up a few things at a great price. Just thought I’d share in case you're looking for some good deals too!
Last edited by Stampie on Oct 7th, '24, 12:07, edited 1 time in total.
John Stone
Posts: 3612
Joined: Oct 6th, '08, 07:30
Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com

Re: How to Build a Reinforced Boom

Post by John Stone »

Stampie wrote: Sep 29th, '24, 21:25 Great work on the boom build! The details in your videos, especially on the Awlgrip application and reinforcing bar, are super helpful. Did you run into any tricky parts with the hardware installation?
Stample. Thanks. No. Nothing particularly hard about any of it. Just what's on the video. There are a few more tips on the the mast refit video reinstalling hardware. Might be useful to you.
JD-MDR
Posts: 886
Joined: Feb 8th, '17, 14:23
Location: s/v "Leoma" 1977 CD 30K #46 San Francisco CA

Re: How to Build a Reinforced Boom

Post by JD-MDR »

Thanks for posting John
I hope you are ok in that hurricane “Helene”
WDM3579
MMSI 368198510
John Stone
Posts: 3612
Joined: Oct 6th, '08, 07:30
Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com

Re: How to Build a Reinforced Boom

Post by John Stone »

JD-MDR wrote: Sep 30th, '24, 08:49 Thanks for posting John
I hope you are ok in that hurricane “Helene”
We are good on the coast. Others in western NC are not. Whole towns washed away. Others completely cut off. Just stunning....
Post Reply