Whisker pole stowage option
Moderator: Jim Walsh
-
- Posts: 892
- Joined: Feb 8th, '17, 14:23
- Location: s/v "Leoma" 1977 CD 30K #46 San Francisco CA
Whisker pole stowage option
I want to get the pole off the deck and i don't want it on the stanchions. Here is how i put it. Im hoping for critiques. Ideally I would like a track and hardware on the mast. But I can spend any more. This might be too noisy. Maybe its not a good idea on the shrouds. If I have to I will put it back on the deck chocks I made. Problem is its under the kayak and to much trouble to access
- Attachments
-
- 32F593A3-F5F4-4E8D-82F4-71B9197F6A4C.jpeg (2.23 MiB) Viewed 997 times
-
- 874E634B-355D-49C9-8DBD-F05DE9F3CF8F.jpeg (3.15 MiB) Viewed 998 times
-
- 2C96714F-2612-436B-88E5-E9235268CD48.jpeg (1.95 MiB) Viewed 1000 times
WDM3579
MMSI 368198510
MMSI 368198510
-
- Posts: 3621
- Joined: Oct 6th, '08, 07:30
- Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com
Re: Whisker pole stowage option
I don't see why that won't work. I'd whip the hell out of that upper ring--for sure. I don't think that will hurt your lower turnbuckle but keep an eye on it. The pole is heavy. A better plan might be to go too another ring on a stanchion if it's in an area that will work. Or maybe bolt a whisker pole bracket to the deck and snap in there.
I may have an aluminum whisker pole deck bracket if you're interested. It's free.
I may have an aluminum whisker pole deck bracket if you're interested. It's free.
-
- Posts: 892
- Joined: Feb 8th, '17, 14:23
- Location: s/v "Leoma" 1977 CD 30K #46 San Francisco CA
Re: Whisker pole stowage option
Thanks John. I have some deck chocks. I havent removed them yet. I will try this out like i have it in the photo.
WDM3579
MMSI 368198510
MMSI 368198510
-
- Posts: 892
- Joined: Feb 8th, '17, 14:23
- Location: s/v "Leoma" 1977 CD 30K #46 San Francisco CA
Re: Whisker pole stowage option
I decided to stow it back on deck. I got too much negative feedback from the other forum. Anyway its not too hard to get out just a little problem putting it away under the kayak. I can always lash it to the stanchions temporarily if its too rough
WDM3579
MMSI 368198510
MMSI 368198510