Harken MK III 00AL
Moderator: Jim Walsh
Harken MK III 00AL
Anyone have experience with this particular furler? Harken MK III 00AL isn't going back down after I lifted the drum for access to the turnbuckle to shorten and tighten the head stay. I can‘t seem to get it back down to where it belongs. I have the manual and must admit I cant figure it out. It seems to be banging agains something inside the assembly and I’m skittish to take it apart.
You do not have the required permissions to view the files attached to this post.
Steve Dawson
CD22
CD22
Re: Harken MK III 00AL
Update: I just spoke to Harken about my Furler. They said I have to bang on the torque tube with a rubber mallet and quite hard too. There are rivets that hold in the tack shackle on the torque tube and they can get caught. If that doesn't work I have to drill out the rivets and then replace them. Of course don't damage the foil! 3 good whacks did it. Hope this can help someone if they have this problem.
Steve Dawson
CD22
CD22