I recently acquired a CD25 with no running rigging. Does anyone know what lines I need to get her on the water?
Maripro has the following lines specified for the CD25 (not sure if these are correct or not):
38' genoa sheet
63' genoa halyard
60' main halyard
I found another thread on this forum with most of what I need sans the topping lift:
3/8" 50' main sheet
http://www.capedory.org/board/viewtopic ... ft#p127453
In addition, I'm sure i need a main sheet. Also, it seems like i might need some kind of topping lift? There are two pulleys on my mast head... one for the mainsail halyard, the other for a topping lift? Or flag?
Any help would be greatly appreciated!
Thanks in advance,
Josh
CD25 running rigging questions
Moderator: Jim Walsh
- Dick Kobayashi
- Posts: 596
- Joined: Apr 2nd, '05, 16:31
- Location: Former owner of 3 CDs, most recently Susan B, a 25D
Re: CD25 running rigging questions
Welcome to the Board.
I suggest you download and print the manual for your boat.
CD25-1978-Manual-1.pdf
Go to the CD specifications page and poke around - you will find it.
Essential reading and reference guide for an owner, I'd say. It will answer today's questions and tomorrow's (well mostly).
FW
I suggest you download and print the manual for your boat.
CD25-1978-Manual-1.pdf
Go to the CD specifications page and poke around - you will find it.
Essential reading and reference guide for an owner, I'd say. It will answer today's questions and tomorrow's (well mostly).
FW
Dick K
CD 25D Susan B #104
Mattapoisett, MA
Fleet Captain - Northeast Fleet 2014/2015
Tempus Fugit. And not only that, it goes by fast. (Ron Vacarro 1945 - 1971)
CD 25D Susan B #104
Mattapoisett, MA
Fleet Captain - Northeast Fleet 2014/2015
Tempus Fugit. And not only that, it goes by fast. (Ron Vacarro 1945 - 1971)
Re: CD25 running rigging questions
If you have any desire for sail performance think about going with low stretch halyards. They made a huge difference on Christine C.
Jeff
Jeff
- tartansailor
- Posts: 1527
- Joined: Aug 30th, '05, 13:55
- Location: CD25, Renaissance, Milton, DE
Re: CD25 running rigging questions
There are two pulleys on my mast head... one for the mainsail halyard, the other for a topping lift? Or flag?
Spinnaker.
The topping lift is closer to the center of the mast on my boat.
Spinnaker.
The topping lift is closer to the center of the mast on my boat.
Viam Inveniam Aut Faciam