Rust on Stainless Steel.

Discussions about Cape Dory, Intrepid and Robinhood sailboats and how we use them. Got questions? Have answers? Provide them here.

Moderator: Jim Walsh

Post Reply
BernieA
Posts: 84
Joined: Feb 22nd, '18, 20:20

Rust on Stainless Steel.

Post by BernieA »

I have noticed rust developing on turnbuckles, cables and other parts, and went looking for a rust removal product. I have some Naval Jelly, but it warms not to use it on Stainless. I found a product called Bar Keeper's Friend that comes in a powder containing oxalic acid. I bought a can at the grocery store for about $3. I sprinkled it on a wet cloth, rubbed it on and brushed in spots like threads where the cloth wouldn't get into. I rinsed it off after a minute or so and found that it really worked great. Not expecting much, I didn't take before and after pictures. Turns out this is a cheap and easy solution, and I really like cheap and easy.

Bernie
CD28 S/V Pinafore
User avatar
mgphl52
Posts: 1809
Joined: Feb 6th, '05, 14:15
Location: s/v KAYLA CD 28 #318
Contact:

Re: Rust on Stainless Steel.

Post by mgphl52 »

Thanks Bernie! I'll have to give that a try on KAYLA. I've used Never Dull in the past but that's far from easy...
-michael & Toni CDSOA #789
s/v KAYLA CD28 #318
2012 FLSTC Heritage Classic
Niceville FL
+30° 30' 24.60", -86° 26' 32.10"
"Just because it worked, doesn't mean it works." -me
No shirt + No shorts = No problem!
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Re: Rust on Stainless Steel.

Post by Jim Walsh »

It is also available in a cream.
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
User avatar
bottomscraper
Posts: 1400
Joined: Feb 5th, '05, 11:08
Location: Previous Owner of CD36 Mahalo #163 1990
Contact:

Re: Rust on Stainless Steel.

Post by bottomscraper »

You can also buy 99% Oxalic Acid in bulk for bigger jobs. 2lbs for about $15 on Amazon. (even cheaper in larger quantities) It also works for bleaching teak and removing topside stains. You mix it about 4oz to a gallon of hot water. Wear gloves and eye protection!
Rich Abato
Nordic Tug 34 Tanuki

Previous Owner Of CD36 Mahalo #163

Southern Maine
http://www.sailmahalo.com
John Stone
Posts: 3621
Joined: Oct 6th, '08, 07:30
Location: S/V Far Reach: CD 36 #61 www.farreachvoayges.net www.farreachvoyages.com

Re: Rust on Stainless Steel.

Post by John Stone »

I have have very good luck with “Magica Rust Remover Gel”. It was was recommended by a couple charter boat skippers during my first trip to the Caribbean. You can also use it on paint and plastic/delrin if you get a rust streak on it.
You do not have the required permissions to view the files attached to this post.
User avatar
KMagill
Posts: 43
Joined: Apr 21st, '14, 18:51
Location: SV Take 2 25D Hull 106

Re: Rust on Stainless Steel.

Post by KMagill »

I have had great success using Collinite Metal Wax No. 850.
It removes superficial rust from stainless with little effort.
It also leaves a protective film that last a good while.
I use it at the beginning of each season.
Keith Magill
SV Take 2
Cape Dory 25D Hull 106
User avatar
Dick Kobayashi
Posts: 596
Joined: Apr 2nd, '05, 16:31
Location: Former owner of 3 CDs, most recently Susan B, a 25D

Re: Rust on Stainless Steel.

Post by Dick Kobayashi »

There is no better buy than BKF. I always have some on board and also under my kitchen sink. A very different product than clorox / detergent based mild cleaners. How did it get its name? No clue.
Dick K
CD 25D Susan B #104
Mattapoisett, MA

Fleet Captain - Northeast Fleet 2014/2015



Tempus Fugit. And not only that, it goes by fast. (Ron Vacarro 1945 - 1971)
User avatar
Sea Hunt Video
Posts: 2561
Joined: May 4th, '11, 19:03
Location: Former caretaker S/V Bali Ha'i 1982 CD 25D; Hull 69 and S/V Tadpole Typhoon Week

Re: Rust on Stainless Steel.

Post by Sea Hunt Video »

I second Dick K.'s recommendation of Bar Keeper's Friend. I use it all over the house and all over S/V Bali Ha'i. It works great, does not cause any damage to material and is easy to clean up. It is a great product and, by comparison to other so-called "marine cleaners", etc., it's cheap.
Fair winds,

Roberto

a/k/a Sea Hunt "The Tadpole Sailor"
CDSOA #1097
________________________________
"I wish to have no Connection with any Ship that does not Sail fast for I intend to go in harm's way." Captain John Paul Jones, 16 November 1778, as quoted in Naval History and Heritage Command, http://www.history.navy.mil
User avatar
Tod Mills
Posts: 349
Joined: Feb 5th, '05, 12:00

Re: Rust on Stainless Steel.

Post by Tod Mills »

This might be helpful...

https://spaco.org/Passivate.htm
Tod Mills
Montgomery 17 "BuscaBrisas", Sandusky, OH (with trips elsewhere)
Tartan 26 project boat
Cape Dory admirer
Post Reply