CD 25, #622 to be PARTED OUT
CD 25, #622 to be PARTED OUT
Cape Dory #622 came to my possession as a "project boat" in October 2009. Sadly it has been "moored" in my backyard since that time. The inside wooden panels were removed (and stored) in preparation to fully remove the inside paint. The boat arrived without portlights and I did not find suitable replacements that would drop in with little or no fiberglass modification. All external teak has been removed and stored (except for the rub rails).
My energy (i.e. health) is not what it was back in 2009. And I also had a fully functional Capri 22 purchased in 2008 which has been my primary sailboat since then — that is where the renovations have paused for the past decade.
WHAT'S AVAILABLE:
Unless someone wants the whole project boat in the next week or so, I will part out the entire boat.
• most all of the teak including round access covers
• pulpit, stern rails, stanchions
• boom, mast, standing rigging (rigging replaced but never put under tension)
• CDI Flexible Furler 4 stored inside and straight with forestay
• fiberglass covers, cooler
• pair of winches
• rudder (already detached) and associated hardware
• mainsail, 110% jib ("useable")
Ask (PM gets to me immediately) if there is anything you are needing. I purchased various other parts that were never installed. I will provide photos as needed.
All I ask is a "fair price" offering plus shipping (actual cost). Willing to meet in the Boston/southern NH area for the bulkier items.
My energy (i.e. health) is not what it was back in 2009. And I also had a fully functional Capri 22 purchased in 2008 which has been my primary sailboat since then — that is where the renovations have paused for the past decade.
WHAT'S AVAILABLE:
Unless someone wants the whole project boat in the next week or so, I will part out the entire boat.
• most all of the teak including round access covers
• pulpit, stern rails, stanchions
• boom, mast, standing rigging (rigging replaced but never put under tension)
• CDI Flexible Furler 4 stored inside and straight with forestay
• fiberglass covers, cooler
• pair of winches
• rudder (already detached) and associated hardware
• mainsail, 110% jib ("useable")
Ask (PM gets to me immediately) if there is anything you are needing. I purchased various other parts that were never installed. I will provide photos as needed.
All I ask is a "fair price" offering plus shipping (actual cost). Willing to meet in the Boston/southern NH area for the bulkier items.
John
CD25 #622
CPDE0622M78E
"You are not going to find the ideal boat. You are not even going to have it if you design it from scratch."
~ Carl Lane
CD25 #622
CPDE0622M78E
"You are not going to find the ideal boat. You are not even going to have it if you design it from scratch."
~ Carl Lane
Re: CD 25, #622 to be PARTED OUT
Pm price me a price on the boom
Thx
Thx
-
- Posts: 35
- Joined: Feb 19th, '14, 14:52
- Location: CD 25 "ADrift"
Re: CD 25, #622 to be PARTED OUT
Are any of the berth cushions available
Re: CD 25, #622 to be PARTED OUT
There are no cushions with this Cape Dory 25.Rockymtndaze wrote:Are any of the berth cushions available
John
CD25 #622
CPDE0622M78E
"You are not going to find the ideal boat. You are not even going to have it if you design it from scratch."
~ Carl Lane
CD25 #622
CPDE0622M78E
"You are not going to find the ideal boat. You are not even going to have it if you design it from scratch."
~ Carl Lane
Re: CD 25, #622 to be PARTED OUT
Interested in stern rails and stations. Let me know the price and other related details. You can email me direction or phone: abutkus03@sbcglobal.net. 913/956-9605
Re: CD 25, #622 to be PARTED OUT
Email sent.abutkus03 wrote:Interested in stern rails and stations. Let me know the price and other related details. You can email me direction or phone: abutkus03@sbcglobal.net. 913/956-9605
John
CD25 #622
CPDE0622M78E
"You are not going to find the ideal boat. You are not even going to have it if you design it from scratch."
~ Carl Lane
CD25 #622
CPDE0622M78E
"You are not going to find the ideal boat. You are not even going to have it if you design it from scratch."
~ Carl Lane
Re: CD 25, #622 to be PARTED OUT
I'm interested in the bow pulpit and stanchions. Thank you. allenrmorton@aol.com 267-825-5890
-
- Posts: 202
- Joined: Sep 22nd, '14, 08:34
- Location: CD 14,CD 27
Re: CD 25, #622 to be PARTED OUT
I'm looking for a folding dinette table for my 27. Does your boat have a folding or pedestal dinette table?
Thanks,
Thanks,
Walter R Hobbs
CD 14 hull # 535, Grin
CD 27 Hull # 35 Horizon Song
Lincoln, RI
"Attitude is the differance between ordeal and adventure."
CD 14 hull # 535, Grin
CD 27 Hull # 35 Horizon Song
Lincoln, RI
"Attitude is the differance between ordeal and adventure."
Re: CD 25, #622 to be PARTED OUT
Good morning
I did not see a reply to any post, like the others, i am interested in the bow pulpit, pushpit, and stations. I would also be interested in the CDI furler, sails, and bimini if you have one.
Regards, Lee
I did not see a reply to any post, like the others, i am interested in the bow pulpit, pushpit, and stations. I would also be interested in the CDI furler, sails, and bimini if you have one.
Regards, Lee
Re: CD 25, #622 to be PARTED OUT
I am interested in the rudder if you still have it.
Robert Creech
Robert Creech