CD36 Traveler bridge
Moderator: Jim Walsh
-
Jeff Barnes
- Posts: 141
- Joined: Jun 5th, '05, 20:19
- Location: CD36 "Blue Note" Harwich Port, MA
CD36 Traveler bridge
Greetings to fellow 36 owners. I am looking for an original replacement for the square aluminum traveler bridge for my CD36. If any of you have replaced your traveler system (i.e. with a Garhauer, etc) and still have the old cross member, I would like to purchase it. I do not need either of the uprights. The reason for the Jazman's replacement is a topic for another day. Regards, Jeff
Re: CD36 Traveler bridge
Is it just the curved aluminum box you're looking for? Try McMaster here: https://www.mcmaster.com/#metals/=1cds3tx
I'm sure a local shop could add the curve & cut to finished length.
Good luck,
John Ring
CD36 Tiara
I'm sure a local shop could add the curve & cut to finished length.
Good luck,
John Ring
CD36 Tiara
Sailing involves the courage to cherish adventure and the wisdom to fear danger. Knowing where one ends, and the other begins, makes all the difference.