Anchor Locker Depth measurement for CD33

Discussions about Cape Dory, Intrepid and Robinhood sailboats and how we use them. Got questions? Have answers? Provide them here.

Moderator: Jim Walsh

Post Reply
Paul D.
Posts: 1273
Joined: Feb 6th, '05, 20:52
Location: CD 33 Femme du Nord, Lake Superior

Anchor Locker Depth measurement for CD33

Post by Paul D. »

Hello CD'ers,

If any 33 owners out there are near their boat, Could you give me the depth measurement of the center of the anchor locker at the aft end? From the underside of the deck to the bottom. Also would like the distance of the lip of the underside of the deck, from the aft end of the anchor locker to the opening of the locker too.

Thanks in advance!
Paul
CDSOA Member
Jeff and Sarah
Posts: 437
Joined: Aug 25th, '09, 17:03
Location: CD33 "Prerequisite" / CD28 Flybridge Trawler "Toboggan"; Annapolis, MD

Re: Anchor Locker Depth measurement for CD33

Post by Jeff and Sarah »

Paul, I’m out of town this week but I can take whatever measurements you need when I get home next week if you still need them.

Jeff
User avatar
Frenchy
Posts: 621
Joined: Mar 14th, '15, 15:08
Location: CD 33 "Grace"

Re: Anchor Locker Depth measurement for CD33

Post by Frenchy »

Hi Paul - Went to the boat this morning (it's in my back yard) before the rain hits later today. Measured 19-1/4"
from bottom to lower part of lip at aft end. Measured 4-1/2" from aft wall of locker proper to fiberglass lip. Hope this
is what you meant. Regards,
Jean
Jean - 1983 CD 33 "Grace" moored in
Padanaram Harbor
Massachusetts
Paul D.
Posts: 1273
Joined: Feb 6th, '05, 20:52
Location: CD 33 Femme du Nord, Lake Superior

Re: Anchor Locker Depth measurement for CD33

Post by Paul D. »

Jean,

That is ideal! Thank you so much, it will help with the planning. Somehow, I lost the measurements I thought I took when we shrink wrapped the boats last fall. They are hours away and, well, are sitting in ten below air and look something like this right now...
You do not have the required permissions to view the files attached to this post.
Paul
CDSOA Member
Post Reply