Does any one know what these are?

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: Jim Walsh

Post Reply
Keith
Posts: 576
Joined: Sep 14th, '12, 20:01
Location: Moon Dance 1979 CD 30C Hull # 134

Does any one know what these are?

Post by Keith »

They have been in my basement since I took them off the boat after purchase 5 years ago. I suspect that they have something to do with the oven which I never took ownership of because it wasn't on the boat at the time of purchase and was in very poor condition so I never brought it home.
things.JPG
things.JPG (105.68 KiB) Viewed 716 times
User avatar
barfwinkle
Posts: 2169
Joined: Feb 6th, '05, 10:34
Location: S/V Rhapsody CD25D

Re: Does any one know what these are?

Post by barfwinkle »

GM Keith

They appear t be pot holders for use on the top of the stove.

Fair Wiinds
Bill Member #250.
RLW
Posts: 140
Joined: Apr 17th, '15, 21:45
Location: CD Ty #858; IP 350 #120; etc.

Re: Does any one know what these are?

Post by RLW »

They are fiddles which clamp onto the front edge of the stove, and "hug" the pot. The gimbal of the stove holds the pots in place when the boat rolls back and forth. The fiddles hold the pots in place when the boat pitches fore and aft. These are necessary when cooking underway.
Rich W.
s/v CARAL (a tribute to Carl Alberg)
CD Typhoon #995 (useable project boat) (sold)
s/v Sadie
CD Typhoon #858
s/v Azure Leizure
IP 350 #120
Tiverton, RI
jen1722terry
Posts: 521
Joined: Jun 1st, '13, 17:05
Location: CD 31. #33 "Glissade"

Re: Does any one know what these are?

Post by jen1722terry »

Our newer Origo 600 has these. They're a bit different from the ones your showing. They were pricey when we bought them ($60?), so you have a valuable set of parts there.

Jenn and Terry
Jennifer & Terry McAdams
Kearsarge, New Hampshire
Mahone Bay, Nova Scotia
CD 31 #33 "Glissade"
Way too many other small boats
Keith
Posts: 576
Joined: Sep 14th, '12, 20:01
Location: Moon Dance 1979 CD 30C Hull # 134

Re: Does any one know what these are?

Post by Keith »

good to know thanks everyone
Post Reply