Aluminum mast winch pad for CD 25

Rockymtndaze · Post by **Rockymtndaze** » Jul 28th, '15, 19:30

I'd greatly appreciate any information or suggestions as to where I might obtain another aluminum mast winch pad to mount a Barlow 15 winch on my CD 25 mast - just like the original pad that was factory fitted? The pad is contoured on the mast side to match the curve section of the mast.
David

bottomscraper · Post by **bottomscraper** » Jul 29th, '15, 12:37

Rig-Rite may have it. If it's the "CD3" mast it's SP-064 on the page below. Even though it shows up on the web site it may not be really available. Dealing with Rig-Rite can be a frustrating experience. Be prepared for sticker shock if they do have it. Good luck!

http://www.rigrite.com/Spars/Spartan_Sp ... _mast.html

Rockymtndaze · Post by **Rockymtndaze** » Aug 22nd, '15, 22:23

Thank you. They had one. I now have it, and yes, sticker shock also!

tjr818 · Post by **tjr818** » Aug 22nd, '15, 22:38

That might be a record for "fast" service from Rig-Rite. Congrats

pete faga · Post by **pete faga** » Aug 23rd, '15, 12:53

Under $50 or over

Rockymtndaze · Post by **Rockymtndaze** » Aug 23rd, '15, 22:31

Double .....

The Cape Dory Board

Aluminum mast winch pad for CD 25

Aluminum mast winch pad for CD 25

Re: Aluminum mast winch pad for CD 25

Re: Aluminum mast winch pad for CD 25

Re: Aluminum mast winch pad for CD 25

Re: Aluminum mast winch pad for CD 25

Re: Aluminum mast winch pad for CD 25