Stainless steel....or is it?

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: Jim Walsh

Post Reply
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Stainless steel....or is it?

Post by Jim Walsh »

Just a reminder to take a magnet with you when you are looking for a bargain priced piece of stainless hardware. Buying from a trusted source only, such as name brand suppliers, is the only other alternative. The rusty "stainless" ring has only been exposed to the salt air environment for four months. The Wichard replacement is truly stainless and should prove its real value over time.
Attachments
Faux and real stainless
Faux and real stainless
image.jpg (1.2 MiB) Viewed 271 times
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
User avatar
Steve Laume
Posts: 4127
Joined: Feb 13th, '05, 20:40
Location: Raven1984 Cape Dory 30C Hull #309Noank, CT
Contact:

Re: Stainless steel....or is it?

Post by Steve Laume »

That thing got nasty fast!

When I redid my Amsteel splice I forgot to put the ring in the loop. Rather than redo the thing again I switched over to a shackle instead of a ring. It wasn't planned but I justified my lack of diligence by thinking that now I can disconnect the bungee cord and store it down below when the boat is laid up for the winter. This should help with sun damage, Steve.
Post Reply