Topsides in primer...

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: Jim Walsh

Post Reply
RLW
Posts: 140
Joined: Apr 17th, '15, 21:45
Location: CD Ty #858; IP 350 #120; etc.

Topsides in primer...

Post by RLW »

After several iterations of filling, fairing, and epoxy coating the tough spots, I finally have a boat that's all one color! Battleship grey! This is the Interlux Pre-Kote primer. Next step is green Brightside. That'll be a couple of weeks from now because it's time to go cruise the New England coast!
Attachments
image.jpg
image.jpg (1.49 MiB) Viewed 625 times
Rich W.
s/v CARAL (a tribute to Carl Alberg)
CD Typhoon #995 (useable project boat) (sold)
s/v Sadie
CD Typhoon #858
s/v Azure Leizure
IP 350 #120
Tiverton, RI
User avatar
tjr818
Posts: 1851
Joined: Oct 13th, '07, 13:42
Location: Previously owned 1980 CD 27 Slainte, Hull #185. NO.1257949

Re: Topsides in primer...

Post by tjr818 »

Great job! Now get that tape off :!: :wink:
Tim
Nonsuch 26 Ultra,
Previously, Sláinte a CD27
RLW
Posts: 140
Joined: Apr 17th, '15, 21:45
Location: CD Ty #858; IP 350 #120; etc.

Re: Topsides in primer...

Post by RLW »

Tim...
I need it for the topcoats. It's supposed to be 14 day tape!
Rich W.
s/v CARAL (a tribute to Carl Alberg)
CD Typhoon #995 (useable project boat) (sold)
s/v Sadie
CD Typhoon #858
s/v Azure Leizure
IP 350 #120
Tiverton, RI
User avatar
tjr818
Posts: 1851
Joined: Oct 13th, '07, 13:42
Location: Previously owned 1980 CD 27 Slainte, Hull #185. NO.1257949

Re: Topsides in primer...

Post by tjr818 »

"Supposed to be..." The 60 day tape that we used wasn't good for 10. I'm afraid that the 14 days may be how long it will take to remove the tape and the residue. She's not out in the sun is she? Your shed might be enough to keep the tape from being baked on. I wish you well.
I can't wait to see the final paint job. Green, that sounds very neat.
Tim
Nonsuch 26 Ultra,
Previously, Sláinte a CD27
RLW
Posts: 140
Joined: Apr 17th, '15, 21:45
Location: CD Ty #858; IP 350 #120; etc.

Re: Topsides in primer...

Post by RLW »

The fine line tape I had a problem with in the past was in the sun, especially on one side. The sun definitely made a difference. This morning I removed the tape from the newly varnished teak because I won't be getting to the next step for several days. The tape on the old bottom paint can stay. When I finally take that off maybe it will take some of the old bottom paint with it and save me some sanding! Your take on the 14 day spec made me chuckle!
Rich W.
s/v CARAL (a tribute to Carl Alberg)
CD Typhoon #995 (useable project boat) (sold)
s/v Sadie
CD Typhoon #858
s/v Azure Leizure
IP 350 #120
Tiverton, RI
RLW
Posts: 140
Joined: Apr 17th, '15, 21:45
Location: CD Ty #858; IP 350 #120; etc.

Re: Topsides in primer...

Post by RLW »

WOW! Way more sanding than I anticipated. 120 grit, then 220. Finally some green!
Attachments
image.jpg
image.jpg (1.47 MiB) Viewed 495 times
Rich W.
s/v CARAL (a tribute to Carl Alberg)
CD Typhoon #995 (useable project boat) (sold)
s/v Sadie
CD Typhoon #858
s/v Azure Leizure
IP 350 #120
Tiverton, RI
Skeep
Posts: 617
Joined: Feb 23rd, '13, 08:16
Location: Previously CD Typhoon #729, now Alberg 30 Hull #614
Contact:

Re: Topsides in primer...

Post by Skeep »

Lookin good RLW can't wait to see more. I like the work-tent!
Skeep
Supporting Member #1576 of the CDSOA
Current Vessel, Alberg 30 Hull #614 to be named yet
Formerly S/V Hull #729 "Baggy Wrinkles"
Blogsite for Alberg Ty and Alberg 30 continues athttp://baggywrinkles.blogspot.com
Located at Lake Murray Sailing Club, Chapin South Carolina
RLW
Posts: 140
Joined: Apr 17th, '15, 21:45
Location: CD Ty #858; IP 350 #120; etc.

Re: Topsides in primer...

Post by RLW »

Skeep...The "boat barn," as I call it, is a cheapy by King Canopy (10x20). I used to keep 3 small boats in it for the winter until I bought CARAL. She just fits; the trailer doesn't quite! I like it because it is right next to the garage, so I have tools, power, compressed air, etc. When I had a CD 28 I had a larger, round top RV style version which was fantastic! Made boating a 12 month hobby! It was tall enough that I could stand straight up in the cockpit. A couple of 4' fluorescent shop lights suspended from the ridge and it was like daylight in there!

The first coat of Brightside is not quite as smooth as I was hoping for, but passes the ten foot test. I'll sand between coats as per the instructions, apply the next 2 coats very carefully (and thin), and see if it improves. Overall I am very satisfied so far. Does your TY live in the water or is she trailer sailed? If in the water, how is your paint holding up, especially the stern quarters that are nearly horizontal and often wet? Rich
Rich W.
s/v CARAL (a tribute to Carl Alberg)
CD Typhoon #995 (useable project boat) (sold)
s/v Sadie
CD Typhoon #858
s/v Azure Leizure
IP 350 #120
Tiverton, RI
RLW
Posts: 140
Joined: Apr 17th, '15, 21:45
Location: CD Ty #858; IP 350 #120; etc.

Re: Topsides in primer...

Post by RLW »

...the second coat is looking better. One more to go.
Attachments
image.jpg
image.jpg (1.33 MiB) Viewed 419 times
Rich W.
s/v CARAL (a tribute to Carl Alberg)
CD Typhoon #995 (useable project boat) (sold)
s/v Sadie
CD Typhoon #858
s/v Azure Leizure
IP 350 #120
Tiverton, RI
Post Reply