New Monitor wind vane installation

Don't forget to snap some photos while you work on that boat project, then share them here.

Moderator: Jim Walsh

Post Reply
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

New Monitor wind vane installation

Post by Jim Walsh »

Cold, intermittent showers, wind, occasional sunshine. Perfect time to install a wind vane. Since I was working alone I had to devise a means of lifting the unit and securing it so I could make the critical measurements, drill the necessary mounting holes, and generally do with two hands a task which often begged for four. The tough part would be getting the main frame suspended in mid-air in it's approximate final mounting position. With my limited imagination and engineering skills I decided a temporary dingy davit would fit the bill. It was lashed in place and worked perfectly. Three 2X3's cost about six bucks, money well spent. I had the four part tackle on the boat already and it also was ideal for this task. After securing the tackle to the cross beam of the "davit" and the main frame of the Monitor all I had to do was lift it into its approximate position and follow the assembly and mounting instructions. Much easier said than done but "all's well that ends well" and the result is a solid installation.
Attachments
Suspended
Suspended
image.jpg (78.72 KiB) Viewed 390 times
In place
In place
image.jpg (92.05 KiB) Viewed 390 times
Done!
Done!
image.jpg (93.5 KiB) Viewed 390 times
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
flyboy5724
Posts: 69
Joined: Apr 30th, '14, 10:44

Re: New Monitor wind vane installation

Post by flyboy5724 »

Great install! Which wind vane did you buy, would it work on a 28? I sure wish I could have bought your windless from you. Thanks for sharing.
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Re: New Monitor wind vane installation

Post by Jim Walsh »

flyboy5724 wrote:Great install! Which wind vane did you buy, would it work on a 28? I sure wish I could have bought your windless from you. Thanks for sharing.
A "Monitor". Yes, it would work on a 28. Here's hyperlink if you're interested.
http://www.selfsteer.com/index.php
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
User avatar
Sea Hunt Video
Posts: 2561
Joined: May 4th, '11, 19:03
Location: Former caretaker S/V Bali Ha'i 1982 CD 25D; Hull 69 and S/V Tadpole Typhoon Week

Re: New Monitor wind vane installation

Post by Sea Hunt Video »

Jim:

Your three (3) photos show up rotated 90 degrees on my computer screen. Confident that it is not my computer screen I am wondering how many Guinness you consumed before taking these photos :?: :D
Fair winds,

Roberto

a/k/a Sea Hunt "The Tadpole Sailor"
CDSOA #1097
________________________________
"I wish to have no Connection with any Ship that does not Sail fast for I intend to go in harm's way." Captain John Paul Jones, 16 November 1778, as quoted in Naval History and Heritage Command, http://www.history.navy.mil
Jim Walsh
Posts: 3364
Joined: Dec 18th, '07, 13:04
Location: CD31 "ORION" Hull #27 Noank, Ct.

Re: New Monitor wind vane installation

Post by Jim Walsh »

Sea Hunt Video wrote:Jim:

Your three (3) photos show up rotated 90 degrees on my computer screen. Confident that it is not my computer screen I am wondering how many Guinness you consumed before taking these photos :?: :D
Roberto,
That's strange. They are right side up on my iPad. I wonder how they appear to everyone else? If I could have rotated my boat 90 degrees it would have made installation easier :D
Jim Walsh

Ex Vice Commodore
Ex Captain-Northeast Fleet

CD31 ORION

The currency of life is not money, it's time
User avatar
tjr818
Posts: 1851
Joined: Oct 13th, '07, 13:42
Location: Previously owned 1980 CD 27 Slainte, Hull #185. NO.1257949

Re: New Monitor wind vane installation

Post by tjr818 »

They are in the correct orientation on my computer and on my iPad.
Tim
Nonsuch 26 Ultra,
Previously, Sláinte a CD27
User avatar
barfwinkle
Posts: 2169
Joined: Feb 6th, '05, 10:34
Location: S/V Rhapsody CD25D

Re: New Monitor wind vane installation

Post by barfwinkle »

Hmm?

They are correct on my iPad but not the MacBook

Fair Winds
Bill Member #250.
User avatar
Steve Laume
Posts: 4127
Joined: Feb 13th, '05, 20:40
Location: Raven1984 Cape Dory 30C Hull #309Noank, CT
Contact:

Re: New Monitor wind vane installation

Post by Steve Laume »

The first photo was a little confusing until I knocked over my computer monitor then they all looked good.

Great job Jim. You don't mess around when it comes to problem solving, Steve.
Post Reply