Hi All,
I just bought a 1980 30 Cutter with a Volvo-Penta MD7A that is missing the exhaust manifold and thermostat housing. Does anyone know where I can find used parts. A new manifold ranges from $1150 to $1800 and can't find a new thermostat because they are discontinued. I would be greatfull for any leads. I'm on Cape Cod.
Thanks Keith
Need MD7A Exhaust Manifold and Thermostat Housing
Moderator: Jim Walsh
Re: Need MD7A Exhaust Manifold and Thermostat Housing
Keith - Check out the other "buy/sell" board on this website. There is a listing for a running MD7a and a non-running engine. Maybe you can get the parts from the non running engine.
Good luck.
Good luck.
-
- Posts: 506
- Joined: Dec 22nd, '10, 21:15
- Location: Feet Dry, Olympia, WA
Re: Need MD7A Exhaust Manifold and Thermostat Housing
I just posted a pile of parts from the engine on ebay. I'll list the starter soon too. Search Volvo MD7
Better photos can be seen here:
http://s793.beta.photobucket.com/user/j ... ibrary/MD7
![Image](http://i793.photobucket.com/albums/yy213/jroe650/MD7/IMG_0352.jpg)
![Image](http://i793.photobucket.com/albums/yy213/jroe650/MD7/IMG_0353.jpg)
Better photos can be seen here:
http://s793.beta.photobucket.com/user/j ... ibrary/MD7
![Image](http://i793.photobucket.com/albums/yy213/jroe650/MD7/IMG_0352.jpg)
![Image](http://i793.photobucket.com/albums/yy213/jroe650/MD7/IMG_0353.jpg)
-
- Posts: 31
- Joined: Nov 18th, '09, 12:18
- Location: Capedory 30 Fayaway Watch Hill RI
Re: Need MD7A Exhaust Manifold and Thermostat Housing
I have the manifold and housing your looking for if you have not located one yet. Send a private message if you care to.