Hi all,
Well, Alaina is hauled out and on the hard. Biggest issue is cutlass bearing need replaced.
Where is a good place to order one from?
The size is 1" x 1.25" x 3", right?
Thanks!
-David Cruickshank
CD28 #174 "Alaina"
Supplier for cutlass bearing
Moderator: Jim Walsh
I don't see that exact size but they have them close here:
http://www.deepblueyachtsupply.com/prod ... aring.aspx
Note that these have non-metallic sleeves.
-michael
http://www.deepblueyachtsupply.com/prod ... aring.aspx
Note that these have non-metallic sleeves.
-michael
-michael & Toni CDSOA #789
s/v KAYLA CD28 #318
2012 FLSTC Heritage Classic
Niceville FL
+30° 30' 24.60", -86° 26' 32.10"
"Just because it worked, doesn't mean it works." -me
No shirt + No shorts = No problem!
s/v KAYLA CD28 #318
2012 FLSTC Heritage Classic
Niceville FL
+30° 30' 24.60", -86° 26' 32.10"
"Just because it worked, doesn't mean it works." -me
No shirt + No shorts = No problem!
-
- Posts: 839
- Joined: Feb 8th, '06, 18:30
- Location: Canadian Sailcraft 36T
Hamilton Marine
Hamilton Marine in Portland, Maine stocks a very large selection of cutlass bearings.
- Cathy Monaghan
- Posts: 3503
- Joined: Feb 5th, '05, 08:17
- Location: 1986 CD32 Realization #3, Rahway, NJ, Raritan Bay -- CDSOA Member since 2000. Greenline 39 Electra
- Contact:
Morse Blackfish
The cutless bearing for your boat should be the Morse Blackfish (1" x 1 1/4" x 4"). You can Google that, you'll get lots of hits and can shop by best price. West Marine charges more than double than what you'd pay elsewhere. I purchased one a couple years ago from Boatman's I-Net Marine.
Shop by price: http://www.google.com/products?q=morse+ ... &scoring=p
Cathy
CD32 Realization, #3
Rahway, NJ
Raritan Bay
Shop by price: http://www.google.com/products?q=morse+ ... &scoring=p
Cathy
CD32 Realization, #3
Rahway, NJ
Raritan Bay