Supplier for cutlass bearing

DaveCD28 · Post by **DaveCD28** » Sep 24th, '09, 08:03

Hi all,

Well, Alaina is hauled out and on the hard. Biggest issue is cutlass bearing need replaced.

Where is a good place to order one from?

The size is 1" x 1.25" x 3", right?

Thanks!

-David Cruickshank
CD28 #174 "Alaina"

mgphl52 · Post by **mgphl52** » Sep 24th, '09, 19:57

I don't see that exact size but they have them close here:
http://www.deepblueyachtsupply.com/prod ... aring.aspx
Note that these have non-metallic sleeves.

-michael

Maine Sail · Post by **Maine Sail** » Sep 25th, '09, 08:05

Hamilton Marine in Portland, Maine stocks a very large selection of cutlass bearings.

Cathy Monaghan · Post by **Cathy Monaghan** » Sep 25th, '09, 12:21

The cutless bearing for your boat should be the Morse Blackfish (1" x 1 1/4" x 4"). You can Google that, you'll get lots of hits and can shop by best price. West Marine charges more than double than what you'd pay elsewhere. I purchased one a couple years ago from Boatman's I-Net Marine.

Shop by price: http://www.google.com/products?q=morse+ ... &scoring=p

Cathy
CD32 Realization, #3
Rahway, NJ
Raritan Bay

DaveCD28 · Post by **DaveCD28** » Sep 25th, '09, 22:24

Thanks for all the information, folks. I will look into the links that were supplied.

David Cruickshank