Bronze Typhoon Name Plate

[Steve Lepley]

Now that my refit is complete on my Typhoon, I want to put my bronze name plate back on the vertical part of the transom behind the tiller.

Since I;ve alwgripped the cockpit, I no longer have the original screw holes as a template. I vaguely recall the the top of the nameplate was a few inches below the teak aft trim near the mainsheet cleat.
Can anyone be a little more accurate as to how many inches below the mainsheet the top edge of plate was originally.

Thanks
Searunner

[Mike Wainfeld]

http://www.mv.com/ipusers/whale/tillerstay/

Look under Cape Dory Typhoon for the photo