Removing 2 cushions
Moderator: Jim Walsh
-
- Posts: 901
- Joined: Feb 5th, '05, 10:29
- Location: Dream Weaver, CD25D, Noank, CT
lex parsimoniae
Warren,
Thanks for the great thread. I too am sick of the back rests falling off underway and stepping all over them at night. This is definitely one of those "why didn't I think of that" solutions.
For once there is an upgrade with minimal cost - a few pillows from Pier 1! And even I can handle unscrewing the backboards.
Of course I have to find a way to spend some money. So I'm now thinking that since on a 25D I only use the quarter berth for storage and I've already removed that cushion. And with the two back rests gone, I'm down to three counting the little guy that tucks into the port bulkhead opening. Now I can upgrade my cushions at a fraction of the cost and still have some money left over for food.
I was so impressed with Andy adding the ash strips that I'm going to post separately to ask a few questions. Boy will that set off the interior of a 25D!
You've certainly made my day.
Dick
Thanks for the great thread. I too am sick of the back rests falling off underway and stepping all over them at night. This is definitely one of those "why didn't I think of that" solutions.
For once there is an upgrade with minimal cost - a few pillows from Pier 1! And even I can handle unscrewing the backboards.
Of course I have to find a way to spend some money. So I'm now thinking that since on a 25D I only use the quarter berth for storage and I've already removed that cushion. And with the two back rests gone, I'm down to three counting the little guy that tucks into the port bulkhead opening. Now I can upgrade my cushions at a fraction of the cost and still have some money left over for food.
I was so impressed with Andy adding the ash strips that I'm going to post separately to ask a few questions. Boy will that set off the interior of a 25D!
You've certainly made my day.
Dick
-
- Posts: 1300
- Joined: Nov 21st, '05, 08:20
- Location: CD28 Cruiser "Loon" Poorhouse Cove, ME
Keeping Cushions in Control
For what it's worth, I control my cushions with a strip of velcro attached to the backboard and the back of the cushion. No problem with heeling whatsoever. Personally, I wouldn't remove them. It all boils down to personal preference.
CDSOA Commodore - Member No. 725
"The more I expand the island of my knowledge, the more I expand the shoreline of my wonder"
Sir Isaac Newton
"The more I expand the island of my knowledge, the more I expand the shoreline of my wonder"
Sir Isaac Newton
Another way...
My cushions have fabric "tabs" with snap fasteners, which go over the top of backrests and attach to the backside of the backrests.
I added slide bolts that are used to hold backrests in upright position, and slide bolts that can hold the backrest in horizontal position, which creates huge shelves/counters that I have found very useful.
I added slide bolts that are used to hold backrests in upright position, and slide bolts that can hold the backrest in horizontal position, which creates huge shelves/counters that I have found very useful.
- Warren S
- Posts: 254
- Joined: Jul 27th, '06, 21:22
- Location: s/v Morveren
Cape Dory 270 Hull #5
Washington, NC
So: *that's* what those are for!
We have noticed the snaps on the other side of the backrests and couldn't figure out what they were for. Our cushions don't have said snaps.
![Image](http://i93.photobucket.com/albums/l49/AmpTRookee/morveren03.jpg)
"Being hove to in a long gale is the most boring way of being terrified I know." -Donald Hamilton
- Parfait's Provider
- Posts: 764
- Joined: Feb 6th, '05, 13:06
- Location: CD/36 #84, Parfait, Raleigh, NC
berthed Whortonsville, NC
Nice Pics Andy
Andy,
Those are fine pictures, but where are you that you are having a cold day? Come to balmy Raleigh!
Well, it's not that balmy: 68°F, when I started this post.
Those are fine pictures, but where are you that you are having a cold day? Come to balmy Raleigh!
Well, it's not that balmy: 68°F, when I started this post.
Keep on sailing,
Ken Coit, ND7N
CD/36 #84
Parfait
Raleigh, NC
Ken Coit, ND7N
CD/36 #84
Parfait
Raleigh, NC
-
- Posts: 1483
- Joined: Jul 5th, '05, 11:23
- Location: CD 31 "Loda May"
Additional note
The throw pillows we bought at Pier 1 were a little taller (standing up) than the space between the berth and the bottom of the shelf. So you can compress them a bit and push them into that space. The tension keeps them from falling out in most conditions. That was the underway mode.
At night (we did not use them for sleeping) they went into the quarter berth, swapping out for the sleeping pillows and sleeping bags.
On long trips, the quarter berth was full of plastic totes of food, cases of drinks, etc.; so, at least early in the trip, the throw pillows, one on top of the other, went on the galley counter at night.
Dean
At night (we did not use them for sleeping) they went into the quarter berth, swapping out for the sleeping pillows and sleeping bags.
On long trips, the quarter berth was full of plastic totes of food, cases of drinks, etc.; so, at least early in the trip, the throw pillows, one on top of the other, went on the galley counter at night.
Dean
Dean Abramson
Cape Dory 31 "Loda May"
Falmouth, Maine
Cape Dory 31 "Loda May"
Falmouth, Maine
-
- Posts: 188
- Joined: Feb 8th, '05, 11:12
- Location: 27' Cape Dory (Alerion),
9' Dyer,
Grosse Pointe, Michigan
good source for new cushions
Warren,
When I replaced my cushions about 3 years ago I shopped around and got by far the best price from a local mom & pop furniture reupholstery shop. They were very experienced at building boat cushions and beat all the boat/canvas specialists by 30-50% in price.
BTW...my hull #167 never had seat back cushions that I know of...could it have been an option from the factory?
Kurt
When I replaced my cushions about 3 years ago I shopped around and got by far the best price from a local mom & pop furniture reupholstery shop. They were very experienced at building boat cushions and beat all the boat/canvas specialists by 30-50% in price.
BTW...my hull #167 never had seat back cushions that I know of...could it have been an option from the factory?
Kurt
- Warren Kaplan
- Posts: 1147
- Joined: Feb 5th, '05, 11:44
- Location: Former owner of Sine Qua Non CD27 #166 1980 Oyster Bay Harbor, NY Member # 317
Re: good source for new cushions
Kurt,Kurt wrote:Warren,
When I replaced my cushions about 3 years ago I shopped around and got by far the best price from a local mom & pop furniture reupholstery shop. They were very experienced at building boat cushions and beat all the boat/canvas specialists by 30-50% in price.
BTW...my hull #167 never had seat back cushions that I know of...could it have been an option from the factory?
Kurt
I went over to a nearby marine cushion shop to get a quote, just to have a reference point. Haven't got the quote yet. When I get it I'll start to do what you did and see if I can find some experienced people who can do the job without charging the "marine premium". I wonder if in fact the back cushions were an option.
"I desire no more delight, than to be under sail and gone tonight."
(W. Shakespeare, Merchant of Venice)
(W. Shakespeare, Merchant of Venice)