The Cape Dory Board

Regarding the location and positioning of the upright supports for either screwjacks or bunks for a Typhoon, the preferred distance laterally is approximately 48”between the bunks or screwjacks, and the height above the keel pad should be roughly 20-24” with some adjustability for fine tuning. The f...

I have several sets of original winches from Typhoons if you are still looking for some...

I actually hav a very well-built wooden cradle for a Typhoon sitting on a trailer that I would be happy to part with, but I don’t know your location - I’m on the East Coast... I have converted over a dozen aluminum & galvanized powerboat trailers to carry full-keel sailboats such as Typhoons, Bu...

Is your Typhoon Sr. still available by chance? I know someone that is looking for one if so...I'll be glad to put you in touch with home if you'd like.

Don't know if you've completed keyed the job of changing out the Typhoon cockpit drain valves & thru-hills yet or not, but I'd be happy to talk you through the entire process if you're still at it... There are several ways to tackle the job and a variety of tools that you can employ to assist yo...

Don't know if you're the same person I've already responded to from another post, but I could trace you a pattern for the v-berths if you like...

Better than measurements would be to get a template/pattern for any or all cushions to include cockpit ones (highly recommended!).
Let me know - I'd be happy to supply them if you'd like.

I know Bar Harbor well as both sides of my family are from there and my mom lives there still. I'd be happy to offer any counsel you might want. Feel free to call or email me directly @ Bocaturabank@yahoo.com. You'll have a wonderful time there - be sure to leave some time free for sailing on French...

I have come across a 1973 Typhoon Weekender that had the original hull id #s (CPDDO420M73D), covered up with a homemade metal tag reading "??LFAH468E(or 3)270. The boat has a valid Florida title matching the tag #... I've tried contacting Florida Div. if Titles to try to get an explanation of t...

I have recently built & delivered galvanized & aluminum trailers for Typhoons, Ty Sr.s, and a CD25D (aluminum), to Punta Gorda, Fl, Northern NC, Rhode Island, Martha's Vineyard & mid-coast Maine. All trailers have screwjack hull supports, mast support/winch/bow rest stands, tongue extens...

Hi there, I just posted an ad that says I've got almost an entire set of Typhoon parts, components & sails available for sale... Happy to try and help you out with whatever you may need to complete your recent acquisition! Congratulations on your "new" Typhoon and I look forward to cha...

I have a variety of Typhoon parts for sale including hardware, original teak woodwork, hatch covers, cabintop sluding cover, sails, winches, and other miscellaneous items. Most notable perhaps is a brand-new, still-in-the-box mast tabernacle from RigRite with invoice showing cost of $269.+ $20. frei...

Thanks Roberto - that's exactly the info I was looking for... a 10" wide piece of aluminum channel has 9" of open area between the two sides, which would be a very smug fit - a 12" wide channel has 11" of inside dimension - enough to allow for painting the sides of the keel with ...

I'd like to purchase your cushions - have tried to contact you via email but got no response... are they still available & if so, where? Thanks! Alan @ 843-450-2498

Has this CD25D sold yet? Where is it located? I'm in touch with someone in search of a CD25D and would be happy to put him in touch with you if the boat is still available... If so, is it hauled out or still floating? Is there a trailer - I can help out in that dept. if not... Good luck!